About FYBROC - FIBERGLASS PUMP

These pumps are available in different materials to provide excellent corrosion resistance for tough applications including pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids. 

Major Markets : Chemical Steel Pulp and paper Electric utility Aquaculture/aquarium Industrial waste-water.

Primary Products Horizontal ANSI pumps Horizontal close-coupled pumps ISO standard pumps Recessed impeller pumps Magnetic drive pumps Self-priming pumps Vertical sump pumps Dry pit vertical sump pumps Cantilever sump pumps Close-coupled cantilever sump pumps.

Fybroc^® Materials of Construction

Materials of construction are available for wide range of corrosive liquids. Only Fybroc® has the flexibility in materials selection to solve your difficult corrosive or abrasive pump problems.

VR-1 Vinyl Ester Resin

Fybroc's® standard vinyl ester resin compound, VR-1, handles a vast majority of corrosive applications including most acids, caustics, bleaches, seawater, brine and other liquids.

VR -1 BPO/DMA Vinyl Ester Resin

Fybroc's® VR -1 BPO/DMA vinyl ester resin with BPO-DMA cure system is designed to accommodate applications for specific corrosion resistance to bleaches such as sodium hypochlorite (NaOCl) and hydrogen peroxide (H 2 O 2 ).

VR-1A Vinyl Ester Resin

Fybroc's® VR-1A vinyl ester resin with abrasive resistant material is designed for pumping liquids with low concentration highly abrasive fines such as fly ash, diatomaceous earth or titanium dioxide.

VR1-V Vinyl Ester Resin

Fybroc's® VR-1V vinyl ester resin with synthetic veil-fiberglass protection is designed specifically for fluoric applications such as hydrofluoridic acid (HF) and fluosilicic acid (H 2 SiF 6 ).

EY-2 Epoxy Resin

Fybroc's® EY-2 epoxy resin offers outstanding chemical resistance for aggressive chemical/compounds, acids, and solvents. It is ideal for high concentration sulfuric acid (up to 98%).

FDA Approved Resins

The Dow DERAKANE series epoxy vinyl ester resin utilized by Fybroc®, when properly formulated and cured, will comply with the U.S. Food, Drug and Cosmetic Act as amended under regulation 21 CFR 177.2420. These resins may be used safely as articles or components of articles intended for repeated use in contact with food, subject to certain limitations described in the regulation.

SERIES 1500 HORIZONTAL ANSI PUMP

Each of our Fybroc Series 1500 Horizontal ANSI Pumps are engineered for broad corrosion-resistance through the use of high-quality materials and state-of-the-art engineering. The Series 1500 is designed to maximize the life of bearings and mechanical seals, and provide exceptional structural integrity, corrosion resistance and dependable service in difficult operating environments.

SERIES 1530 HORIZONTAL CLOSE COUPLED PUMPS

Each of the Fybroc Series 1530 Horizontal Close Coupled Pumps are custom designed with premium quality materials and innovative technology for a lightweight and space efficient solution to fit your needs. The Series 1530 is manufactured with fiberglass reinforced plastic (FRP) materials for corrosion resistant durability, structural integrity, and dependable service in difficult operating conditions.

SERIES 1600 SELF-PRIMING PUMPS

The Fybroc Series 1600 Self-Priming Pump combines an extensive knowledge of materials and production techniques to provide exceptional structural integrity and excellent corrosion-resistance in a high quality self-priming pump.

Each pump is engineered for quality and manufactured with fiberglass reinforced vinyl ester resin components for corrosion resistance to most acids, caustics, bleaches, seawater, and other liquids, making it ideally suited for waste sump applications, tank car unloading, and other demanding services. In addition, the pump’s flexible stuffing box design accepts a wide variety of shaft sealing configurations to suit the needs of specific applications, including both outside and double inside mechanical seals.

SERIES 1630 CLOSE COUPLED SELF-PRIMING PUMPS

The Fybroc Series 1630 Close Coupled Self-Priming Pump offers the benefits of a close coupled pump integrated with the features of the Series 1600 pump. By combining an extensive knowledge of materials and production techniques, we are able to deliver solutions with structural integrity and excellent corrosion-resistance in a high quality self-priming pump.

Each pump is engineered for quality and manufactured with fiberglass reinforced vinyl ester resin components for corrosion resistance to most acids, caustics, bleaches, seawater, and other liquids, making it ideally suited for waste sump applications, tank car unloading and other demanding services.

SERIES 2530 MAGNETIC DRIVE CLOSE COUPLED PUMP

Each Fybroc Series 2530 Magnetic Drive Close Coupled Pump is custom engineered to deliver maximum performance, efficiency, and durability for a wide range of applications, including chemical processes, metal finishing, scrubber OEMs, hydrochloric acid, nitric acid, automotive, pulp & paper, specialty chemicals, and many others.

Our Series 2530 pump is manufactured with Fiberglass Reinforced Polymers (FRP) for corrosion resistant durability and structural integrity and is built to ANSI/ASME B73.1 dimensions. With our sealless design, zero emissions / leakage, simple operation, and maintenance, and with ten available sizes, we confidently deliver solutions to fit your specific needs and challenges.

SERIES 2630 SELF-PRIMING MAGNETIC DRIVE CLOSE COUPLED PUMP

The Fybroc Series 2630 is a self-priming, magnetic-drive, close-coupled, sealless pump that incorporates many of the features found on the Fybroc Series 2530 pumps. Designed with fiberglass reinforced plastic (FRP) for corrosion resistant reliability and dependable service, our Series 2630 pump is ideally suited for corrosive sump applications, tank car unloading, and other similar demanding applications.

As the leader in corrosion-resistant fiberglass pumping equipment, we confidently deliver solutions designed to handle corrosive liquids, optimize efficiency and performance, and tailored to your difficult corrosive or abrasive pump challenges.

The Fybroc Series 3000 is a custom-designed Recessed Impeller Horizontal Pump featuring a recessed impeller design, manufactured with Fiberglass Reinforced Polymers (FRP) for corrosion resistant durability, structural integrity, and dependable service. Our pumps provide smooth flow-through pumping for heavy duty applications and are available in five sizes.

 

Our Fybroc Series 5500 Vertical Sump Pump is engineered to provide exceptional structural integrity, excellent corrosion-resistance, and dependable service in the most difficult chemical or waste sump environments. Our innovative designs make it a perfect choice for handling tough applications such as chemical wastes of varying pH, plating wastes, circulation of spent pickling solutions, electrolytes or nickel plating baths, salt water or brine, marine applications (e.g., de-watering and barges/cargo unloading), and hundreds of other difficult sump pump services.

Through years of experience and nineteen sizes available to fit your specific requirements, we confidently deliver high-quality, corrosion-resistant pumps designed to handle corrosive liquids with optimized efficiency and performance, ensuring a long life and trouble-free operation.

SERIES 5530 DRY PIT VERTICAL SUMP PUMP

The Fybroc Series 5530 Dry Pit Vertical Sump Pump is the product of extensive engineering experience and knowledge of specialized production techniques. We have designed a corrosion-resistant, structurally superior, highly dependable pump suitable for the most difficult dry pit applications such as chemical wastes of varying pH, plating wastes, circulation of pickling liquor, electrolytes or plating baths, salt water or brine, and hundreds of other difficult services.

Tailored to offer space and weight savings combined with the ruggedness of a standard Series 5500 pump and sixteen available sizes, we can deliver the solutions you need for optimal performance and integrity for your application needs.

SERIES 6000 VERTICAL RECESSED IMPELLER SUMP PUMP

In heavy duty pumping applications that combine suspended solids and corrosive fluids, ordinary centrifugal pumps will not do. Fybroc pumps in fiberglass with a recessed impeller design overcome both problems: clogging and corrosion. Recessed impeller vortex action permits non-clog flow-through of solids with minimal impeller contact.

SERIES 7500 CANTILEVER SUMP PUMP

Our Fybroc Series 7500 Cantilever Sump Pump is designed to handle the most severe sump pump applications where supply of external flush water is either impractical or undesirable.

The Series 7500 is manufactured for exceptional strength and rigidity, the ideal choice for pumping tough liquids like chemical and plating wastes, pickling liquors or electrolytes, salt water or brine, and hundreds of other difficult sump services. With specialized construction materials for corrosive and abrasive liquids, and nineteen available sizes, we confidently deliver solutions tailored for your specific pump challenges.

SERIES 7530 CLOSE COUPLED CANTILEVER SUMP PUMPS

Each Fybroc Series 7530 Close Coupled Cantilever Sump Pump is designed for use on shallow recirculation sumps such as those found on liquid scrubbers. With five available sizes, specialized construction materials for corrosive and abrasive liquids and combining an extensive knowledge of materials and production techniques, we are able to deliver solutions with structural integrity and excellent corrosion-resistance.

SERIES 8500 VERTICAL TURBINE PUMPS

The Fybroc Series 8500 is the first corrosion resistant Vertical Turbine Pump with the casings and mixed flow impeller constructed from homogeneous Fiberglass Reinforced Plastic (FRP) materials. We have combined state of the art Resin Transfer Molding (RTM) techniques and proprietary wax core technology with extensive knowledge of materials and production techniques to provide an exceptional structural integrity and corrosion-resistant pump for applications including seawater intake, brackish water reverse osmosis, brine, recirculation, and transfer.

As the leader in corrosion-resistant fiberglass pumping equipment, we confidently deliver solutions designed to handle corrosive liquids, optimize efficiency and performance, and tailored to your difficult corrosive or abrasive pump challenges.